Skip to content
CBT Nuggets
DemoBook a Demo

Define the Properties of Radio Frequency (RF)

The skill focuses on understanding the fundamental properties of radio frequency (RF) and its role in wireless communication. It explores the nature of light as a wave, the electromagnetic spectrum, and the importance of waveforms in RF communication. Key concepts include frequency, wavelength, and phase, which are crucial for data modulation and encoding in wireless networks. The skill emphasizes the need for a strong grasp of these principles to excel as a wireless engineer.

Full skill from Cisco CCNP WLCOR 350-101. Preview the training IT teams trust.

Updated

49m

Skill 1 of 38 in Cisco CCNP WLCOR 350-101

What you'll learn

  • Physics of Light
  • Anatomy of RF Waves
  • Frequency and Wavelength
  • Phase
  • Analysis Challenge

Free 49-minute video lesson with a full transcript and knowledge checks. No account needed to watch.

Physics of Light

Wi-Fi uses light for communication. Not visible light, but light nonetheless, and understanding how light behaves at a fundamental level is necessary to push us toward becoming better wireless engineers.

Knowledge Check

Wi-Fi operates at 2.4, 5, or 6GHz. How does this compare to visible light?

Anatomy of RF Waves

Every RF signal — whether it's carrying a video stream or a VoIP call — is a sine wave at its core. Understanding the parts of that wave is the foundation for everything that follows in wireless networking.

Knowledge Check

What term describes the measured height of a wave relative to the origin?

Frequency and Wavelength

Frequency and wavelength are two sides of the same coin — one describes how fast a wave cycles, the other describes how much physical space each cycle occupies. Neither can change without affecting the other.

Knowledge Check

A wave completes 5,000,000 cycles per second. How is this expressed?

Phase

Phase describes where a wave is in its cycle at any given moment — and in wireless networking, that position carries information. The ability to intentionally shift phase is one of the fundamental mechanisms behind modern wireless modulation.

Knowledge Check

A wave is shifted 180° relative to another wave of the same frequency. How are the two waves positioned?

Analysis Challenge

The diagram above shows three waveforms labeled Wave A, Wave B, and Wave C.

  1. Using Wave A, identify the origin, crest, trough, and amplitude of the waveform.
  2. Compare Wave A and Wave B. What two properties are shared between them?
  3. Compare Wave A and Wave C. Which one has the higher frequency, and which has the longer wavelength?
  4. A fourth wave, Wave D, is introduced that is identical to Wave A but shifted 180°. Draw Wave D and describe what would happen to the signal if Wave A and Wave D intersected simultaneously at the same point.

Solution Review

Knowledge Check

What does the period of a waveform measure?

View Transcript

Physics of Light

0:01Wireless communication is all about radio frequency. We usually abbreviate this as RF and the name can cause a lot of confusion. There've been a lot of people I've talked to over the years that hear the word radio frequency and assume this has something to do with sound because I know if I turn the radio on in my car, I'm listening to the radio, not seeing the radio. But this is not the case. Radio frequency is actually light. We are talking about light waves.

0:33And so if you're wondering why on earth we're starting this course out talking about light and the physics of light and basically having a high school physics lesson, it's because we have to be more than just good at configuring wireless devices. I started my career out literally the very first thing I had to do as an engineer in this field, or maybe as a tech or whatever I was at the time, was climbing up ladders and installing access points on the ceiling. And as I installed more and more access points, I was eventually trusted with configuring those access points and eventually designing wireless networks.

1:10That is the very first technology I got into in my career. And so wireless has kind of a special place in my heart. I really like this technology a lot. But when we zoom out and look at what makes a good wireless engineer, it's not just configuring devices. I can configure a wireless LAN controller. I can design an architect using Cisco's hardware, either maybe a wireless LAN controller solution or Meraki solution. But in order to be a really good wireless engineer, I have to have a really strong sense of how RF works.

1:44I have to know by looking around a room what kinds of things the wireless signal will be doing. If I position the access point here, if I put this type of antenna on it, if I do any of these things, it will change the properties of RF. And RF typically flows and moves around in a very predictable way. But if I'm thinking about RF wrong, then that's going to cause a lot of problems. Furthermore, if I really want to understand how wireless communication works, especially as it relates to things like modulation and encoding, encoding bits into wireless signals, well, then I have to understand what RF is and I have to understand what a waveform looks like and the different properties and elements, the anatomy of a waveform. And so that is why we're starting out talking about the physics of light, because if I don't understand the physics of light, I'm not going to be as complete of a wireless engineer as I could as I could be.

2:40And so that's what we want to aim for, for sure. So, yes, when we're talking about RF, when I'm talking about, let's say, an access point here communicating with, let's just say, a laptop over here, we sometimes do this kind of concept of drawing these waves going out. These are truly light waves. Now we could immediately say, well, wait a second, Jeff, I can't see that light wave. Why are we calling it light? Well, because light has more to do than just things that I can see.

3:11And this is potentially the biggest gap that occurs when we're trying to fully understand what's happening here, because this light is invisible. In fact, when we take a look at something called the electromagnetic spectrum, the electromagnetic spectrum describes the entirety of our light frequencies. And so we have this long range of frequencies on the electromagnetic spectrum where we have very low frequencies down here, which is really about where radio frequency hangs out.

3:47And then we have really high frequencies up here, like X-rays and gamma rays. These are the harmful types of radiation that we can see. We've got to stay away from those as much as possible. And then right here, sandwiched in the middle, is the visible spectrum. Visible, there we go. It's the visible spectrum. It's very, very small. And at the far left of the lowest frequency side is our red colors, and the highest frequency side is going to be our violets or our purples.

4:20And so when we're seeing different colors, right now I'm using a yellow chalk, I suppose, if I were to change to red, our eyes are seeing a much lower frequency compared to if I switch to purple, and now this is a much higher frequency. And so when you see all the colors of the rainbow, what we're really seeing is a range going from red all the way to, you know, kind of that ROYGBIV, red and orange and yellow and so on and so forth. The frequency of the light waves are increasing, and our eyes and our brains interpret those as different colors.

4:55This is really cool. It's actually pretty fun to geek out on, even though it's not directly related to networking. It certainly, again, is going to help us to figure out what our RF is doing as we kind of break down these concepts. Now, technically, when we talk about what light is, we are often going to focus on the waves, the wave elements or the wave nature of light. However, there is this little aspect of the physics world that is, I guess, worth mentioning, which is that it also can operate as particles.

5:31And there's some very famous experiments that have proven this over time. For example, with proving that it had to do with that light was a wave, we have this concept of a double slit experiment, which basically we shine a light through two slits like this, and we can actually see the impact of this on the other side, meaning that if I were to draw this wave coming at here, and then we see that the waves kind of ripple out both of these slits, and it causes almost these points of interference where waves are canceling each other out, which is, again, another thing that we have to think about with wireless networking for sure.

6:15So we get these shadows that would only show up if light was a wave. Now, most of us probably think about light as being waves. We're kind of trained on this in, you know, maybe, again, middle school or high school science. However, there's also this photoelectric effect type of experiment that shows that it does operate as particles. So you kind of shine waves down, and waves are a little bit more of an analog concept, but then when we hit this photoelectric plate and we're measuring the voltage that's created off of it, well, this shows up actually as discrete levels of energy, which kind of actually means that these light waves are also operating as particles, because every time a particle hits the plate, it increases the amount of energy.

7:01If it operated as true waves, then it wouldn't do that in discrete intervals. So, you know, this is pretty fascinating stuff, and we'll go ahead and leave the history behind, but it's fun because we think about, like, Albert Einstein. He won the Nobel Prize in Physics in 1921 because of his experiments around light and the better understanding we've achieved of what light is. In fact, one of the things that Albert Einstein is best known for is this equation E equals mc squared, which admittedly most of us, myself included to some extent, don't understand what exactly this is saying at at least an Einstein level of understanding.

7:41We might have a basic understanding of it, talking about how energy is equal to mass times this c to c squared, but what is this c? Well, c stands for the speed of light, and the reason they use the letter c is because it's a constant. It doesn't vary outside of being impeded if we slow things down. So basically, it's a constant in a vacuum, especially, for example, the vacuum of space.

8:11And so light isn't actually instantaneous. It doesn't just travel instantly from one side of the room to the other. Our human eyes perceive that. By the time I turn on a flashlight and I shine it on a wall, the moment I turn the flashlight on, I see this on the wall. And the reason for that is not because light just instantly teleports, but because rather, we have a very high speed, and that speed is known, or really calculated, as 2.99 times 10 to the 8th meters per second, a very well established, again, constant that demonstrates just how fast light is.

8:52Now, when we zoom out and look at space, when we're talking about going from the sun to the earth over here, this actually takes eight full minutes for the light to reach us, meaning that if there's an event on the sun, let's say it explodes, well, not literally explodes, but let's say there's like a sun flare or something like that. When we're looking at that on earth, we actually see that eight minutes after it happens because the sun is so far away. And then we look at like the closest star way out here, Alpha Centauri, and it takes four years for that light to reach earth.

9:28And so we do see that it takes time when we vastly expand the scope of the distance, it takes time for light to travel. However, in the scope of a single room, it's basically instantaneous because we're probably talking about microseconds, possibly even picoseconds, the amount of time it takes for the light to travel from one side of the room to the other. And certainly we as individuals with our eyes and our brains, we can't process that that actually happens in a sequential order.

10:00It just all looks like it happens instantaneously to us. Now, importantly, I mentioned this briefly, but the medium does affect light. And this is going to tie into our wireless communications a little bit. Not so much because it reduces the speed in a way that impacts our wireless communications. But if we, for example, have a bunch of water nearby, well, the wireless signal will be impacted by that. The medium matters. It's affected by things like air quality and water and obstructions.

10:35If I shine a flashlight on the wall, I don't expect the light to go through the wall. So we say, well, wait a second, that kind of breaks everything down here because we would say that a flashlight is going to hit a wall and stop. And yet if there's a wall in the path here between our laptop and our access point, usually our wireless will work a little bit. And that's true. But it won't work quite as well, especially depending on the material of the wall.

11:05Now, why does light travel through walls in some cases and not travel through walls in other cases? This has to do with the frequency. A very high frequency is going to have a harder time getting through a wall than a very low frequency. This low frequency will be able to pass through objects. It will be able to pass through walls. And so again, RF is a much lower frequency than the visible light spectrum. So this is why when we come all the way back to Wi-Fi, why this matters so much.

11:38It's important for us to understand the medium concept and just in general our obstructions because this will impact wireless communications in a significant way. Now, the speed doesn't matter a whole lot with wireless communications. However, think about fiber optics. This actually gets a little interesting because the distance from New York in the U.S. to London in the U.K. across the Atlantic Ocean, this is 3,500 miles away.

12:10And it actually takes light 18 milliseconds to travel that far. Yeah, when we're talking about global distances, we're not immune to the speed of light slowing things down for us. We say, well, wait a second, 18 milliseconds. My brain basically still can't process that. And that's great, except network latency is absolutely impacted by this. Like the quickest I could ever get a packet from New York to London is 18 milliseconds. And that assumes a straight path and we're using fiber optics with light in it and we're not stopping along the way through different routers and so on and so forth.

12:48But it's kind of interesting when we apply it to other aspects of our network communications that that really starts to matter. Now, lastly, again, the wave nature of light is going to impact wireless communications significantly, especially as I mentioned, as it relates to modulation, which is how we encode bits into something like light waves. Because my job is to take a light wave like this and convert it into bits like this.

13:21How in the world does that happen? Well, that's data modulation and encoding. And that's the whole point is we've got to take something analog like this and change it into something digital or discrete like binary bits. And if we don't fully understand the concept of waves and the wave nature of light, it's going to be very hard for us to kind of understand that eventually. So zooming out, what we really care about at this point is understanding that our RF radio frequency, which is what Wi-Fi is built on, this is not sound waves, it is light waves.

13:57And so everything we look at when we're talking about going through different mediums, we're talking about reflections and refractions of Wi-Fi signals, we're talking about data modulation with analog signals. All of that comes back to the fact that when we're having wireless communications like this, that we're using light waves in order to achieve it.

Anatomy of RF Waves

0:00The next big thing we need to tackle is the concept of the waveform. Waveforms are a major part of understanding how wireless communication works. As we mentioned, our focus is on the wave nature of light less than that whole wave particle duality concept. And so when we look at a waveform, just independent of whether it's even light or not, we're usually looking at something like this. This is known specifically as a sine or a sinusoidal waveform. The idea here is it looks like a sine wave. So we've talked in trigonometry about sines and cosines and tangents, and there's all kinds of tie-ins to circles and angle measurements. And so that's where the whole sinusoidal concept comes from. For our intents and purposes, what it basically means is that it's a constant kind of repetition as a wave goes up and down and then back up and then back down.

1:00And in theory, this could loop potentially forever, depending on what the source of the energy is that's generating the wave. Now there are three absolutely critical aspects of waveforms that we're going to dive into a little more deeply. It's going to be the frequency of the waveform, the wavelength of the waveform, and these two concepts are tightly tied together, as we'll see. And then lastly, we have the phase. We're going to dive into these elements in a lot more detail right after this video, because each conversation warrants, or rather each concept warrants, its own entire conversation about it. So instead, let's go ahead and start just by identifying what we might refer to as the anatomy of this waveform. And it starts with the concept of having an upper part and a lower part. So we could sort of draw a line right down the middle, and we see that we're modulating this signal up at times and then down at times. And so when we talk about the peak moment, whether it's when it's the furthest away from this line or the furthest away from the line in the opposite direction,

2:18these are going to be known as the crest and the trough. So the crest is going to be the highest point, and the trough is going to be the lowest point. Now, we keep talking about this line in the middle and talking about how it's basically giving us our footing here. I mean, to talk about how far away it is from something, we have to say what we're far enough away from, and really how far away we are from the thing.

2:52And the thing in this case is going to be the origin. So the origin here, we've got lots of terms here that we're throwing out, but the origin is going to be the origin. So the origin is going to be, we'll just call it the middle of the waveform, and really what we're saying there is that when we have, when the waveform is at the origin, it's going to have its, you know, basically neutral level of energy. So we have some amount of energy that carries the waveform up, and then some amount of energy that carries the waveform down to the other side, but right there in the middle is when it's kind of at rest.

3:34If we were to freeze the waveform at that moment, it wouldn't have any energy in it. However, the energy is going to continue down and carry us down to the trough on the other side. And then we have the concept of the period. So the period is interesting. It's the time required to complete a cycle. Well, now we have to define what a cycle is. So let's take a look at that. A cycle is when we start at one point and we come back to the same point. So we go from start point back to the start point in the same direction. All right, this is maybe worth, you know, taking a look from a diagram perspective because this definition feels a little funny.

4:24Really what we're saying here is if I start a cycle here, let's say this is my start point, I've got to get back to this start point, but going the same direction. So I'm going in the upward direction here. So I go up and I go back down and I'm back at my start point, but notice I'm going the wrong direction. So I've got to keep going. And then when I get back finally to the start point, going in the same direction, well, now that has completed a single cycle. Importantly, this is independent of the start point itself. Or maybe I should say where we select the start point to be. So I could actually say that, you know, this in purple or pink or whatever this color is, that that is a single cycle. Well, I could also take green here, start a cycle, let's say here. Well, no, let's go do it here. Right here where I say, okay, this is the start point. Now I need to get, I'm going down like this. So I need to find a spot on this graph where it's still going down, which means that this is also a single cycle.

5:35It doesn't look as pretty if I were to draw them out side by side. Our pink one looks like this and our green one looks like that. Very, very different. However, these are both individually a single cycle. And this is going to tie into the whole phase conversation because basically what we would say here is that it's the same waveform, it's just at a different phase. Because if I were to draw this out, part of the whole sinusoidal concept is if I were to keep drawing out the sine wave, it's just going to keep looping at the same frequency, at the same, you know, well, we haven't defined amplitude yet, I suppose, but it's going to go up the same direction and down the same direction at the same distances. And so now coming back to period, we said that a period is the amount of time it takes to complete a cycle. Well, this waveform is moving. It's necessarily moving. This is a big part of waveforms. They're not sitting still, they're moving in space. This is like when I transmit from my laptop to an access point, that waveform is moving towards the access point. And so if I watch it from a time perspective and I just sort of start a stopwatch and I see how long it takes for this waveform to pass from,

6:57again, our start point here to our end point, this, actually let me draw it in a different color here just to be abundantly clear. So this, right, I went too far, right there. This is the period, but as a measure of time, not a measure of distance. That's very important. So a period might be something like 500 milliseconds or something along those lines. And again, because it's a sinusoidal waveform, it doesn't matter where I measure. So if I measure this period, basically the green one, this would also be 500 milliseconds. Again, from a cycle perspective, it doesn't matter where I start as long as I end in the right spot, and then a cycle is a cycle. And both of these would take that 500 milliseconds or whatever the period is for this particular waveform. Now the last one is, as I mentioned, amplitude. Amplitude is the height of the wave, and it's relative to origin, we'll say from origin.

8:08So when we're looking at this, we're saying that the amplitude here measures from origin up to the crest, is usually how we're going to measure amplitude. And so when I look over here, though, we see the amplitude goes the other direction. However, even though it's, call it negative, where we're talking about a positive amplitude and a negative amplitude, the amplitude and a negative amplitude, the value of that is going to be the same. So we basically have the crest is the same distance from origin as the trough is, again, when it's a sinusoidal waveform.

8:51So as we can see here, I keep kind of coming back to this concept, but a sinusoidal waveform is in a way sort of this concept of a perfect waveform, meaning that it's a smooth curve, the frequency never changes, it's moving at a constant speed, and we have, you know, the same distance of amplitude from the origin at both the crest and the trough. And so this is a perfect, or maybe a better word is ideal. And for the most part, this is how we can think of wireless waveforms as well. Certainly there will be imperfections in the real world, but we are also only transmitting usually a single cycle at a time. And so it's not like we need to worry about this changing as we produce, you know, 50 cycles that the cycles all stay the same. We're just going to transmit a single cycle at a time. And so we can really think about this in terms of the ideal waveform when we're thinking about wireless communication. So some of these points of anatomy are going to matter more than others when it comes to wireless waveforms. For example, amplitude is going to matter, it represents the energy of the waveform. And so when we're talking about the wireless signal and how strong of a signal it is, we're usually talking about the amplitude at that point. And so some of these matter, period and origin, crest and trough,

10:07they don't matter quite as much, but it's still important for us to be able to identify these different elements, again, the anatomy of the waveforms, as we continue to dive deeper into these conversations.

Frequency and Wavelength

0:00It's time to dive into frequency and wavelength. So when we're talking about frequency, what we're talking about is how many cycles can fit into a particular timeframe. And so we might draw a waveform like this. I've driven drawn three independent cycles here just to kind of give us an idea of what this looks like. And then I could also do something like this, where we see that, okay, in the same amount of time, I'm able to fit far more wavelengths or really cycles into the same amount of time. And so here we see three cycles.

0:36And let's say this took one second. So if this time span was one second, then we had three cycles per second here. This one, if I count one, two, three, four, five, six, seven, eight, we have eight cycles per second. So again, the exact same timeframe, but in one case we only got three cycles while the other one we got eight. We're talking about frequency. We usually use this lowercase somewhat curly F to represent frequency.

1:09If we see it showed up in text or anything like that, it usually looks like it's italicized or maybe cursive or something along those lines. Now we have a special word or a special method for measuring our cycles per second. This is known as the Hertz. And we say Hertz. We're talking about the last name of a person. It was named after Heinrich Hurst or Hertz Heinrich Hertz who helped do a lot of research on this type of topic. And so when we say a Hertz, one Hertz represented by H Z and because it's named after a person, the H is going to be capitalized here.

1:49So one Hertz is equal to effectively one over seconds. This is from a unit perspective. So notice the word cycle here kind of disappears. We're talking about something, a number of somethings per second. It doesn't matter what it is. In our case, we're talking about cycles per second and that's usually where we use Hertz. So in our examples here, we would have had a three Hertz signal on top and we have an eight Hertz signal down here on the bottom. So if we map that out, we say, well, wait a second, what would be, let's say 1000 cycles per second?

2:25Well, 1000 cycles per second is going to equal 1000 Hertz. And at this point we start using those abbreviations or I guess what my units methods for measurement, which would be one kilo Hertz. So in the same way we'd say a kilometer or a kilogram is a thousand of something. One kilo Hertz is 1000 Hertz, 1000 cycles per second. And then we can expand that to say, well, what about 1 million Hertz?

2:56Well, that's going to be one mega Hertz. One thing you'll notice is I'm saying things like one Hertz and one mega Hertz and one kilo Hertz. And that hurts my brain a little bit, because it feels like that we're trying to say this is plural. It's not plural. It's a unit that, yeah, I don't say one Hertz and two Hertz. That would be plural. Hertz is actually, again, somebody's last name. And so it, even if we only have a single Hertz, we would still say it like that. And then if we were to have 1 billion Hertz at this point, that would be one gigahertz. Again, same way as like a kilobit per second, a megabit per second, a gigabit per second. We're talking about one and 1000, 1 million and 1 billion. And we can just kind of keep on going from there.

3:48Now, interestingly, when we look at wifi, wifi tends to operate at a number of different ranges. We can look at the 2.4 gigahertz spectrum. We can look at the five gigahertz spectrum. And these days we can even look at the six gigahertz spectrum. So it all operates within the realm of gigahertz. And what's fascinating about this is as fast as that feels saying that it's 6 billion cycles per second for wifi. How does that compare to something like visible light? Remember, the electromagnetic spectrum covers all types of light, whether it's wifi or visible light or something like x-rays.

4:26And so visible light fascinatingly operates in the range from 400 to 800. What do we think? It's terahertz. Yeah. One more step beyond gigahertz. So when we talk about wifi, wifi is basically operating at again, like six gigahertz visible light operates, if that's the right word at 400,000 gigahertz, because the terahertz is a thousand gigahertz. Wow.

4:59That is significantly faster. And so wifi operates very, at a very, very low frequency compared to the visible light spectrum, which is why we can't see it. By the way, it's too low of a frequency for our eyes to pick up. Now next we're going to talk about wavelength and we've combined these conversations because wavelength and frequency are bound together by math, just by physics. And we'll see what the ad equation looks like. Effectively wavelength is then going to measure the distance of a single cycle.

5:35Again, a wave form is a physical concept as we've said, it takes time for it to propagate. And yes, there is a distance, a measurable distance for how far apart these different individual cycles are from one another. Or I guess a better way of saying it is there is a length associated with the cycle. And that is the length of a single cycle. That is the wavelength. Now, remember we also measured a time distance or a time, the amount of time it takes for that wave form to pass.

6:15And that is known as the period. So we're measuring kind of the same thing. My arrow represents, you know, the length of the wave form. It's just with period, we're measuring how long it takes that wave form or that individual cycle to pass by. Whereas the distance itself is our wavelength. So when we think about wifi and we're looking at, let's say a five gigahertz signal that has a rough wavelength of about six centimeters, which is measurable.

6:46Six centimeters is what about that long on my screen, on your screen? I'm sure it's not six centimeters because our screen sizes are very different from one another, but it's something me and you, you and I, we can see this where we can pick up on six centimeters. The downside is we can't actually see the light and that's okay. But the idea here is that these wavelengths are actually something that you and I can perceive. It's not like a Pico meter or anything like that. Visible light meanwhile has something like a 400 to 700 nanometer.

7:21That's an N nanometer wavelength. And now also we have a symbol for wavelength and it is the Greek letter Lambda. Throw that in there. So Lambda is this, if you've never drawn a Lambda before, you kind of draw a slant like a straight slant and then you draw almost like a little curvy backwards S in a way. And that is how we create the letter Lambda. Now what's important about wavelength is we'll find that this is inversely proportional to our frequency.

7:58That sounds really fascinating or maybe even a little bit fancy, I suppose, inversely proportional to frequency. It sounds fancy, but basically what it's saying is if I increase my frequency, then I decrease my wavelength. Conversely, if I increase my, here I'll say equals, if I increase my wavelength, then I decrease my frequency. This is what it means to say it's something is inversely proportional to one another. And if I increase one, the other one goes down, which kind of makes sense. When I look at these two different waveforms, one having a lower frequency, this is a lower frequency and this down here is a higher frequency.

8:42What does the wavelength do? Notice what the wavelength is down here. It's a lower, it's a shorter wavelength versus up here. It's a longer wavelength. This distance here is a lot longer than this distance down here. In fact, when it comes to our waveforms, there is a mathematical equation that shows us exactly how this works. The equation is the speed of the waveform is equal to the frequency times the wavelength. And Hey, remember what this is.

9:14Remember what our waveforms are. This is light and light has a speed. And so this waveform is moving at the speed of light or light speed, I suppose. It's a little more of a sci-fi term there, it feels like, but we're moving at the speed of light. So if the waveform is moving at the speed of light, now our equation can be C times the speed of light. Can be C the speed of light is equal to frequency times wavelength. You want to know how I was figuring out things like how long a five gigahertz signal is and how, what the wavelength is of the visible light spectrum.

9:54It's this equation right here. If I know one of these things, if I know let's say the frequency of a signal, I can calculate the wavelength because I have the speed of light and I have frequency. I always have the speed of light. We always know what that is. So if I only have the wavelength, for example, while I also have the speed of light, therefore I can calculate out the frequency. Pretty cool. How these two concepts are tied together. And we do see that in the wifi world, we tend to focus more on the frequency than on the wavelength itself.

10:25Because we're talking about different frequencies. We're talking about different channels and different channels use different frequencies within our different wifi bands. And so when we're talking about the different gigahertz and the different types of, you know, frequencies, this is going to matter for us to kind of come back to this concept and remember how frequency and wavelength define what the properties of that waveform are.

Phase

0:00Next up, we're going to talk about phase. And phase is interesting because phase is a relative measurement. I really need two waveforms to measure phase because it's a comparison. I can't really say that one waveform on its own has a phase. I'm going to have to look at two of them and compare the two. Phase is measured in degrees. And just like a circle, it's going to range from zero degrees, we'll say to 360 degrees. But at that point we've come full circle, a little bit of pun in there intended maybe, or maybe it's literally, we've come full circle back to the start.

0:38So if I'm measuring a circle, for example, I might start by measuring a 90 degree shift. That would be a quarter of a circle. And then 180 degrees would be half of the circle. 270 would be three quarters. And then by the time I get back to 360 degrees, it's also like I started at zero degrees. So we're kind of comparing this to a circle when we talk about phase. So let's see what this looks like. If I draw a waveform, once again, I really can't say that this has a phase.

1:10We might assume it's a zero degree phase, and we'll just call it a zero degree phase here because we don't have anything to compare it to. And usually, I mean, I could draw out more individual cycles here, but we only really need one cycle for the sake of comparing phase. Now, next I'm going to draw another waveform, and this next waveform is going to have the same frequency, which means it also has the same wavelength. However, it starts at a different point, different starting point.

1:45And so I'm going, I can't draw something like this, let's say different starting point, but it's a completely different frequency. Instead, I'm going to try to draw this exact same waveform, which does take a little bit of concentration sometimes. It's a little bit tricky. Yeah, like that, that was really bad. And then it goes like that. Okay. So maybe not as pretty as a computer could do it, but I think we get the idea. We're taking a waveform and we're pushing it, we're shifting it some amount of degrees.

2:18Now this might be, I'm going to call this something like a 20 degree shift. So if I were to push this all the way to 360 degrees, then this starting point would basically be at the starting point of the next cycle and it would perfectly overlap. And that's why we mean that, Hey, you know, if it's zero degree phase shift, it'd be right on top of it. If it's zero or 360 degree phase shift, well, assuming this is infinite, we've got another waveform coming and we see that it's a perfect overlap as well. So what percentage did I push this?

2:49That's what I'm saying. Maybe about 1 20th or so I pushed it and, you know, 1 18th would be 20 degrees. So that's kind of where, where I landed there. Now there are some key, there are some very important degrees that we pay attention to, and they happen to be the ones up here, the ones that I mentioned, a quarter and a half and three quarters and a full turn, so to speak. And so what I'm going to do here is I'm going to get rid of this arbitrary waveform I just drew and draw some that are pushed in by a specific amount.

3:26So let's draw a 90 degree shift, a 90 degree shift. If I divide this up, I would say this is about a quarter of the waveform. This is half the waveform, and this is three quarters of the waveform. So a 90 degree shift should start a quarter in, and then it should go down here, and then again, it's going to come back up kind of right in the middle of the next waveform and then down around and so on and so forth. So that would be a 90 degree shift.

3:58I could draw that a little bit smoother here. And now we've got our chart here with a 90 degree shift. Now, what about 180 degree shift? This is where things start to get a little more interesting because now I'm going to effectively start right here. And I started by drawing a waveform, you know, like the extended going backwards. But if I were just to start it here, well, you're going to find that it's going to go up and down, and as we compare it to the blue waveform, especially as I do extend this the other direction, we see it's exactly opposite of the zero degree shift.

4:43This is a very important one because if I were to overlap a zero degree shift and 180 degree shift, if at any point I add up the energy levels, noting that we have positive energy levels and negative energy levels, these will cancel out, and this does actually happen. Remember the wave particle duality double slit experiment where we created these overlapping shadows? These shadows are generated by 180 degree phase shifts because the energy levels of the two waveforms actually cancel out, and that's pretty fascinating.

5:19So lastly, we could draw a 270 degree shift on here. Now we're starting here. This is a little bit trickier to draw. However, because it's 180 off of 90, I can just kind of base it on being the opposite of the green waveform. And so we see that we've got these distinct phase shifts of 90 and 180 and 270, and these are easy for us to understand as humans because it really just carves out, again, a quarter push, a half push, and a three quarter push.

5:53However, like I said at the start, when I did the 20 degree phase shift, we could have a 20 degree phase shift. I could have a seven degree phase shift. I could have a 2.2 degree phase shift. There's no limit to what a phase shift can be because these waveforms, remember, are analog in nature. In networking, we like to live in the digital discrete world. It's either a zero or a one, or maybe in this case, it's either a zero degree phase shift or a 90 degree phase shift or something like that.

6:23But no, we can get all the way down to decimal levels of phase shifts. And we actually use these decimal levels of phase shifts when it comes to our wireless modulations. And so that's going to be our Wi-Fi takeaway from this conversation is that when we are performing wireless modulation, we're going to perform intentional shifts in phase. So we're going to use these intentional phase shifts in order to represent different numbers of bits.

6:56For example, maybe something like this, I could say a zero degree phase shift represents zero, zero. And then a 90 degree phase shift represents a zero, one hundred and 80 degree phase shift represents a one, zero and a 270 degree phase shift equals a one, one. Now there's a lot more to talk about, but at a high level, this is the kind of thing I can use when I'm doing wireless communications, I can leverage phase. And importantly, I can also leverage things like amplitude in order to represent different numbers of bits in the wireless communications, because all of the analog is great, but at the end of the day, I really need bits and bytes.

7:39And so this is the concept of encoding. I encode these bits into this type of wireless modulation. So we'll talk about that later on. However, for right now, it's very critical for us to understand this concept of phase shifting, understanding that it's a relative concept. We have to compare it to another type of wave or another waveform. And at that point, as long as it has the same frequency and wavelength, and it's just starting at a different point, at that point, we can measure the phase shift of that second waveform.

Analysis Challenge

0:00All right, let's jump into this challenge here. We're given three different waveforms and we've asked some questions among them. So using wave A, identify origin, crest, trough, and amplitude. The origin, remember, is right here in the middle. We have the crest at the top. We have the trough at the bottom. And the amplitude is the distance to either the crest or the trough. And it starts from the origin. It's all relative to the origin. Next up, we're told to compare waves A and B and what two properties are shared between them. What we notice is that frequency is the same.

0:34So we see that we peak at the same time and we hit the reverse peak at the same time, which also tells us that phase is also identical. So we're at a zero degree phase shift because we haven't shifted at all. So same frequency, same phase. What we do see is we have a much lower amplitude with wave B here compared to wave A. But yeah, frequency and phase being the same, we can kind of see that even with the different amplitude, that it does follow the same pattern.

1:06Now, number three here, compare wave A and wave C. Which one has the higher frequency and which one has the longer wavelength? So the frequency is how many of these waveforms happen in a given timeframe. And so we could say, well, let's count from the times that we crossed this spot. So I see one, two, three, four, and yeah, I guess that's it. One, two, three, one, two, three, four. Yeah, one, two, three, four hertz. Okay, I thought it was four and then I kept crossing my eyes, I think, and seeing a fifth one in there somewhere.

1:41But yeah, we see four hertz, whereas we're comparing this to wave A and we really just see one and two. So this is two hertz. So this has the lower frequency, but notice the wavelength is twice as long when I compare the two, they're inversely proportional. So this has the lower frequency wave A does, but it has the higher lambda or the higher wavelength. And so I guess technically we're asked higher frequency. Higher frequency is wave C, lower frequency is, or higher wavelength is wave A.

2:16Now, lastly, a fourth wave is introduced and it's introduced identical to wave A, but shifted 180 degrees. So what would it look like? It would look like this. We'd be going opposite direction, exact opposite direction with 180 degree phase shift. So remember, basically what we wanna do is every 90 degrees, we shift it in like a quarter of the full wavelength. So this would be like a 90 degree phase shift, but 180 starts here and goes up. And then we can, of course, go backwards like this to complete the chart.

2:50So then we're asked what happens if they intersect at the exact moment or same place in space, especially relevant if it's both received at the receiver at the same time. Well, that means those energy levels cancel out. It's that little bit of waveform math that we did where we say, hey, we're just gonna cancel that energy out because a high energy mark, let's say a positive one energy matches up with a negative one energy. So the exact opposite direction, same value for the energy.

3:21So pretty interesting how this all comes together, but we need to make sure that we can answer these types of questions to understand what frequency and wavelength look like, what phase looks like as we compare different waveforms. I hope this has been informative for you and I'd like to thank you for viewing.

Frequently asked questions

What does the Define the Properties of Radio Frequency lesson cover?

This lesson covers the properties of radio frequency (RF) and how RF behavior affects wireless networks. It gives network and wireless engineers a shared foundation for the course's later topics, such as wireless measurements, bands, channels, gain, loss, and antennas.

How long does the RF properties lesson take to complete?

The lesson runs 49 minutes. It is one part of a course that takes about 11 hours per learner, which fits a sprint-based upskilling plan or a certification-prep playlist for a team.

Which Cisco certification exam does this RF lesson help prepare for?

The lesson is part of the Cisco CCNP Implementing and Operating Cisco Wireless Core Technologies (350-101 WLCOR) v1.0 course. Cisco issues the certification, and the course prepares the learner for the exam.

Who on an IT team should take this radio frequency fundamentals lesson?

An IT Director or Training Manager can assign it to network engineers, wireless engineers, and Team Leads who need stronger design and troubleshooting context before making WLAN changes. The course focuses on concepts and calculations rather than tool-specific configuration, so it works well as baseline enablement before implementation projects.

How does understanding RF properties help with WLAN troubleshooting?

The course builds the RF knowledge teams need to interpret wireless behavior and reduce trial-and-error troubleshooting. Team members who complete it can explain how RF behavior, gain, loss, and antennas influence wireless performance during design reviews and troubleshooting discussions.

How can a Training Manager track team progress through the WLCOR course?

Playlists help sequence the training by team role, and Team Reporting shows per-learner progress and completion, cohort and group views, and completion exports for audit evidence. This helps managers keep wireless upskilling on schedule.

Team training path

Turn this skill into assignable team training

This free skill is a preview of the courses your team can assign, track, and report on with CBT Nuggets.

What's next?

Ready to keep going?

For your team

Bring this training to your team

See how CBT Nuggets helps IT teams close skills gaps, hit compliance targets, and prove training ROI.

Book a Demo
Just need Cisco CCNP WLCOR 350-101?

Learning on your own? Browse individual plans ($49/month, billed annually) →

Not ready to buy?
with no purchase required. Already have an account?
Book a Demo