Categories

Get Started Now

Designing Your Microsoft Home Lab

Studying books and answering practice questions probably isn’t the best way to study for your Microsoft certifications. One of the most effective methods is to combine book knowledge and training with real-world experience. The cost of hardware and software has gone down tremendously in the last decade. So take advantage of low-cost hardware and design your own Microsoft home lab to get hands-on practice as you study for your exams! Here is what you need.

A Dedicated Server with Hyper-V

Microsoft’s Hyper-V was introduced in Windows 2008, but you should have at least Microsoft Windows 2012 for your lab. You don’t need a hardcore server to practice book theories, but you do need a machine that can handle Windows 2012 with enough disk and memory space for at least a couple of virtual machines.

Hyper-V is the Microsoft hypervisor, which lets you host several virtual machines on one machine. An old desktop that you don’t need anymore will do the trick.

One Workstation with Windows Installed

Most corporations still use Microsoft Windows 7 even though the operating system is several years old. Windows 8 wasn’t fully accepted in most corporate environments and Microsoft Windows 10 is steadily gaining acceptance. If you have an old copy of Windows 7 lying around, it’s the best operating system to use for your practice machine.

You can even use your own desktop as long as you don’t expect to make any major changes to configurations. Otherwise, get an old laptop or desktop and follow the instructions in your training manuals.

Wired or Wireless Network with at Least One Router

Your ISP probably provided you with a router that connects your home to their system backend. Whether it’s DSL or cable, you have an ISP router. The problem is that you don’t have control of this hardware and you don’t want to make changes that interrupt service.

You need your own router, and you can buy one at a relatively low cost. Connect it to your ISP router, and then connect your home PCs and mobile devices to your own router. This gives you the ability to fully understand router configurations and managing machines connected to the router. You can customize settings to practice for your exams without interrupting ISP connectivity. Today, most routers include wired and wireless settings.

Network Storage

You could use hard drives installed on your servers and workstations, or you can take your lab to the next level and install network storage or a NAS (network attached storage). A NAS is a hardware device that lets you hot-swap hard drives in each slot. They are hard drives directly connected to the network without installation in a computer.

A NAS isn’t necessary, but it will help you get experience with enterprise storage. It will increase your budget by a few hundred dollars, so if this cost is too steep, just stick to the storage in your workstations and servers.

Basic Configurations

When you set up your network, you want to add a few configurations common in the enterprise. You can follow your workbooks, but you should be prepared to configure your network in a way that lets you practice for exams.

Your server should be configured with DHCP, and you should have Active Directory installed for security. This will make it more difficult to stay casual on your network, but it gives you good practice with what you will see in the real world.

Make sure you configure some of the common Active Directory settings like password rules and restrictions on software installation on workstations. You’ll also want to monitor your network for traffic.

The design of your home lab needs these basic hardware and software components, but you can customize it any way you want to make it feasible for your own environment. It’s relatively low budget for a small home lab, but it makes it much easier to take your exams with the hands-on experience.

Not a CBT Nuggets subscriber? Start your free week now.

CBT Nuggets has everything you need to learn new IT skills and advance your career — unlimited video training and Transcender® Practice Exams, Virtual Labs, validated learning with in-video Quizzes, Accountability Coaching, and access to our exclusive community of IT professionals.

Learn more about the CBT Nuggets Learning Experience.

 

Not a CBT Nuggets subscriber? Start your free week now.

CBT Nuggets has everything you need to learn new IT skills and advance your career — unlimited video training and Practice Exams, Virtual Labs, validated learning with in-video Quizzes, Accountability Coaching, and access to our exclusive community of IT professionals.

Learn more about the CBT Nuggets Learning Experience.

 
Write us your thoughts about this post. Be kind & Play nice.
  1. Aaron White says:

    If I could make a comment, if you’re going the route of getting a new router, you might also look into adding a bit more to the cost and getting a modem if your ISP supports it.

    I ditched my old combo Modem/Router from Mediacom months ago, and I’ve never looked back. Instead of weak signal and random internet drops, the only time I lose connection now is when Mediacom does scheduled maintenance. I get rock-solid connection and I don’t have to constantly call Mediacom every time their router would brick and I would lose the SSID and everything else.

    Now it’s all under my control, and I can even configure a VPN to get in from outside of the house. Oh, and it’s saving about $14 a month on my internet bill, so it’ll pay for itself in about a year.

  2. Simon Lee says:

    I could add to this,as say I purchased a 3rd party router/firewall and used a DMZ for a while until I upgraded to a BT Business Line – which gave me 70/20 and 5x Static addresses.

Comments are closed now.